Air Compressor Pump 14cfm
Air Displacement: 14 cfm
Needs at least 3HP motor
Complete with air intake filter bladed fan flywheel
Twin cylinders
Mounting holes distance across the front is 7.5 inch
Mounting holes distance front to rear is 5.5 inch
Shaft size 1 inch tapered .
Flywheel size 265mm .
If the outlet pipe is on the wrong side of the pump to suit your compressor. You can split the pump just above the block and spin the head around, otherwise you can get a longer flexibale hydraulic hose made to connect the pump to the tank.when fitting a new pump you must run the pump for a minimum of 15 minutes without exhaust pipe attached ,then connect exhaust pipe afterwards.
The Monobloc Tail PUMPING XXS 200 offers exceptional pumping abilities and a fantastic glide.
Aspect ratio: 7.6
Made for dockstarts and endless pumping sessions
Monobloc construction for better stiffness and reduced turbulence
The Monobloc construction improves stiffness and reduces turbulence by eliminating connections and providing a more streamlined design. This premium connection will make any foil more playful, stable, and faster. The Monobloc also removes two screws: you’ll be on the water in no time!The High Modulus Carbon fiber layup used for this Monobloc Tail leads to even more rigidity and dependability that will propel you to incredible performances in each session.