JBL Stage 2 Series speakers deliver the JBL signature concert sound in your car, minivan or SUV at an amazing price. The woofer made of polypropylene has impressive features due to its excellent extended lower range and deep mid-range frequencies. The woofer complements the PEI-balanced dome tweeter that fills the signature sound with vibrant highs. An additional bonus of the Stage 2 Series speaker is the JBL frame design, due to the characteristics of which it will easily enter any factory openings without the need for modifications to the vehicle, location or the speaker system itself. Specifications Maximum noise power 40 W (rms), 240 W (peak) Each Speaker Nominal Impedance 4 Ohm Audio specs Sensitivity (2.83 V / m) 91 dB Frequency response 55 Hz - 20 kHz CF SOUNDS CAR STYLING FULL FITTING SERVICE CALL 0879647099
MoTeCβs Subaru Diff Controllers (SDC, SDC2 and SDC3) are suitable for Subaru WRX and STi vehicles. They are plug-in replacements for the factory fitted Driver Controlled Centre Diff (DCCD) controller, fitting into the OEM box that is bolted to the steering column underneath the dashboard.
It is worth considering the installation of a MoTeCΒ M800 Plug-InΒ ECUΒ in addition to the SDC2 or SDC3 to take advantage of several additional features. Using theΒ RS232Β serial communication link, all values from sensors connected to the SDC2 or SDC3 can be logged in theΒ M800Β Plug-In ECU, without having to duplicate any of the sensors.
Functionality
The SDC units are used to adjust the torque split between the front and rear differentials to achieve greater control over handling characteristics such as traction, braking on loose surfaces, turn in response, and understeer on both corner entry and exit.
The centre differential is essentially a limited slip differential with adjustable preload. The SDCs work by regulating solenoid current, which is proportional to the preload. When no current is applied (0% lock) the centre differential operates as an 'open diff' with a mechanical torque distribution of 65% rear and 35% front (60% and 40% in some vehicles). With increasing current (increasing percentage lock) the preload increases, requiring more torque difference between front and rear wheels before the centre differential will slip.
There are six selectable control modes: 0% lock, 100% lock and four user-configurable modes. These modes can be selected using the DCCD thumb wheel.
All prices are exclusive of Irish VAT.Β VAT is charged at 23% where applicable.