Diathonite Thermactive .037 is a lime-based insulating plaster made from Hydrated lime, NHL 5 binder, Expanded Amorphous Silica, Pumice, Perlite, Cork and Diatomaceous earth. Used internally on solid masonry walls and ceilings, it is highly breathable and helps walls in older buildings dry out thanks to its capillary active nature. Diathonite Thermactive is compatible with a range of substrates, but is mostly applied to solid stone or brick (once any gypsum plaster has been removed) and provides significant thermal improvement to these walls.
A short pre-formed external corner for Cornice 4.01.301, for where the cornice wraps around the outside corner of a building or returns at the end of a run. Its legs are 100 mm shorter than the standard corner, which suits tight returns and short runs such as a cornice over a single door or window. It matches the stepped profile exactly, 297 mm high, with legs of about 308 mm, and joins straight onto the 2 m lengths, so there is no need to mitre the cornice on site. The other corners for this cornice are Cornice 4.01.311 (external corner) and Cornice 4.01.321 (internal corner).