Pink Cup No.9801 is a light red from the Farrow & Ball Archive Collection, with warm red undertones. It sits in the light band of the Farrow & Ball palette. It reflects a generous amount of light, which makes it a dependable choice for north-facing rooms, hallways and smaller spaces that need to feel open.Using Pink Cup in a schemeGreat White No.2006 is the white to run with it — it shares the same undertone, so ceilings, cornices and skirtings stay in the same key. For a scheme built on one colour, step up to Tailor Tack No.302 on walls and down to Naperon No.315 on joinery.Sampling this colourPink Cup sits outside Farrow & Ball's 132-colour signature palette, so it is not produced as a 100ml sample pot. Call in and we can show you the colour on a hand-painted card before you order.Available finishes
Dead Flat — ultra-matt walls, woodwork and metal (2% sheen)
Estate Emulsion — interior walls and ceilings in low-traffic rooms (2% sheen)
Modern Emulsion — washable, scuff-proof walls and ceilings in kitchens and bathrooms (7% sheen)
Flat Eggshell — interior wood, metal, concrete and floors (20% sheen)
Modern Eggshell — hard-wearing wood and metal, including floors and staircases (40% sheen)
Priming and lightPrime bare or previously painted surfaces with Farrow & Ball White & Light Tones Primer & Undercoat. Matching the primer to the depth of Pink Cup gives truer colour and usually saves you a topcoat. Irish daylight is soft and often overcast, which pulls pale colours cooler on a north-facing wall than the card suggests. Try a tester on two walls first.Made to orderPink Cup is a Farrow & Ball Archive colour. Archive colours are mixed to order specifically for you rather than held in stock, so please allow extra time and note that they cannot be returned or exchanged once mixed.Colour reference
Colour number: No.9801
Hex: #E9BFAB
RGB: 233, 191, 171
Colour family: Reds
Collection: Archive Collection
Light reflectance value (LRV): see Far
Perma-White® mould resistant interior paint has a unique formulation, it contains a biocide that protects the dried coating against fungal degradation. In addition the paint film is designed to resist cracking, peeling and blistering for up to 7 years before first maintenance.
Product Overview
Perma-White® mould resistant interior paint contains a biocode that protects the dried coating against fungal degradation*. The paint film is designed to resist cracking, peeling and blistering for up to 7 years before first maintenance.Perma-White® bonds to existing solvent-based or glossy paints. Perma-White® also seals flat paint, new drywall, cement block and concrete. It is ideally suited for any area of persistent high humidity, frequent temperature changes and poor air circulation.Perma-White® Interior Matt Paint - Recommended for application in high-humidity areas where a durable, low sheen finish is desired such as finished basements and kitchens. (This finish was previously known as Eggshell.)Perma-White® Interior Satin Paint - A scrubbable, satin finish recommended for high-humidity areas that are subject to challenging wear and tear. Ideal for bathrooms and laundry rooms.*Satin: Once dried the paint film is classed as a treated article and contains the surface biocide 4,5-dichloro-2-n-octyl-4-isothiazolin-3-one 0.07% by weight.Matt: Once dried the paint film is classed as a treated article and contains the surface biocide 4,5-dichloro-2-n-octyl-4-isothiazolin-3-one 0.068% by weight.
Key Features & Benefits
Scrubbable – Class 1 Wet Scrub Rating (ISO 11998)
Tintable to any BS4800, RAL or NCS colour through the appropriate tint base
This product contains a biocide to protect the dried coating against fungal degradation*
The paint film is designed to resist cracking, peeling and blistering for up to 7 years before first maintenance
Washable, scrubbable, stain and moisture resistant finish
Self-priming – sticks to surface without sanding
Fade Resistant
Wate