A short pre-formed external corner for Cornice 4.31.301, for where the cornice wraps around the outside corner of a building or returns at the end of a run. Its legs are 100 mm shorter than the standard corner, which suits tight returns and short runs such as a cornice over a single door or window. It matches the stepped profile exactly, 202 mm high, with legs of about 258 mm, and joins straight onto the 2 m lengths, so there is no need to mitre the cornice on site. The other corners for this cornice are Cornice 4.31.311 (external corner) and Cornice 4.31.321 (internal corner).
A pre-formed external corner for Entablature 4.32.301, for where the cornice wraps around the outside of a corner or returns at the end of a run over a door or window. It has the same dentilled profile, 194 mm high, with legs of about 305 mm, so it joins straight onto the 2 m lengths without mitring the profile on site. The other corner pieces in the set are Entablature 4.32.321 (internal corner) and Entablature 4.32.331 (second external corner).