Long precision ground cast iron beds help to ensure accurate planing up to 12' wide. The Aluminium fence is over 1 metre in length, can be tilted to 45 degrees and can be moved across the cutterblock to extend the life of the blades when working with narrower timber.The outstanding feature of this machine is that both planing tables are hinged and lift together as one. In addition to that, the planing fence can be left in place so that changing function from planing to thicknessing is quick and easy.
A large handwheel adjusts the thicknessing bed height with a scale marked out in mm and a lock to ensure accuracy when machining a batch of components. In addition we include a micro adjuster to set the thicknesser height to an accuracy of 0.1mm.
The drive mechanism for the thicknesser can be disengaged during planing operations to save wear & tear on those moving parts.
Supplied with 100mm dust extraction outlet, 4 adjustable feet, 16amp industrial plug (round blue type). Requires a 16amp electric supply.
Specification:
Motor (Induction): 3000w, 240v (4hp)
Surfacing width: 305mm
Length of surfacing tables: 1290mm
Maximum depth of cut: 3mm
Fence tilt: 90 - 45 degrees
Table height: 850mm
Thicknessing capacity: 545mm
Feed speed: 7m/min
Maximum depth of cut: 4.5mm
Cutterblock speed: 5500rpm
Number of knives: 312 Months Guarantee!
A compact and portable planer thicknesser.
8'' Planing Capacity
8'' x 5'' Thicknessing Capacity
Aluminium Tables To Minimise Weight
Extruded Guide Fence For Accuracy
Tilting Fence With Twin Guides
Rubber Coated Feed Rollers
100mm Diameter Chip Extraction Outlet
Light enough to move off the bench when not in use and yet tough enough to produce 8" x 5" timber into flat and dimensioned pieces.
The planing beds are precision ground aluminium and the guide fence is a rigid aluminium extrusion which can be tilted and locked at any angle up to 45 degrees when required.
The steel thicknessing bed has an extension arm on the outfeed side and is supported in each corner by chain driven adjusting screws. Once the height is set, rubber coated feed rollers pass the timber through the high speed cutter block leaving a beautiful finish with no roller marks.
The redesigned dust hood now has a quick action clamp to allow faster removal when changing between Planing and thicknessing modes. The hood fits onto the thicknessing bed during planing operations and is then moved over the top when thicknessing. As a safety feature a location sensor detects that the dust hood has been correctly fitted before allowing the motor to run.
Supplied with re-grindable knives, 100mm diameter dust extraction outlet, blade setting tool, 4 adjustable rubber feet, 2.0m power cable and UK 3 pin plug.
PT200 Specification
Surfacing width
204mm (8")
Length of surfacing tables
740mm
Maximum planing depth of cut
2mm
Fence tilt
90 - 45
Table height
360mm
Thicknessing capacity
5 - 125mm (1/4" - 5")
Length of thicknessing table
270mm
Feed speed
8m/min
Maximum depth of cut
2mm
Cutterblock speed
9000rpm
Number of knives
2
Motor (carbon brush)
1500w (2hp), 240v
Dimensions (WxDxH)
830mm x 400mm x 460mm
Weight
28kg
Assembly Time Required
5 Minutes
Rating
Hobby
Warranty
1 Year
It is essential to use dust extraction with a planer thicknesser. The extractor removes all the dust