Traditional Steel Pier Top
This product is for the pier top only.
Technical Details:
- Product code: PM003
- Outside width: 150mm
- Pipe diameter: 60mm
- Material: Galvanised Steel
- Paint: Gloss black as standard, contact us for other colours
DELTA®-THENE
Full-surface cold self-adhesive membrane (KSK) for sealing components in contact with the ground against soil moisture and non-pressing water.
The standard-compliant building waterproofing made of a cross-laminated special HDPE carrier film and a sealing and adhesive layer made of bitumen rubber offers the ideal and permanent moisture protection for the building envelope.
DELTA®-THENE can be used in the following areas of application:
as vertical seal against soil moisture and non-pressing water for the floor and for walls in contact with the ground (in accordance with DIN 18533).
as horizontal seal for balconies (according to DIN 18531), but also for wall and floor surfaces in wet rooms (according to DIN 18534).
as wall barrier (application type MSB-nQ) against capillary water in and under walls or as a base seal against splash water and soil moisture (according to DIN 18533).
as vapour barrier in the floor under screeds.
as an external vapour barrier on waterproof concrete walls.
for sealing the construction joints of filigree/triple waterproof concrete walls.
for flat sealing against radon gas.
DELTA THENE
Material
Cold self-adhesive bitumen rubber as a sealing and adhesive layer with a cross-laminated special HDPE carrier film
Thickness
approx. 1,5 mm
Weight
approx. 1,6 kg/m²
Servicetemperature range
from -30 °C to + 80 °C
Working temperature
from +5°C to +30°C (air and surface). Up to -5°C with DELTA®-THENE KÄLTEGRUNDANSTRICH (COLD BASECOAT)
Widths
1 m
Roll length
5 m and 20 m
Storage
Transport and store upright, store dry and protect from direct sunlight
Disposal
EWC Code 1 703 02 Asphalt, tar-free
Packaging
recyclable
Watertightness (EN 1928, Procedure B)
passed (400 kPa/72 h)
Reaction to fire (EN 13501-1)
Fire class E
Tensile strength (EN 12311-1)
Lengthways: approx. 250 N/50 mm
Crosswise: approx. 250 N/50 mm
Tear resistance (nail shaft) (EN 12310-1)
Lengthways: approx. 150 N
Crosswise: approx. 150 N
F