Universal Primer spray Pintyplus Tech
Anticorrosive alkyd universal primer spray Pintyplus. Matte finish. Free from chrome and lead components.
Applications of the universal primer
Suitable for use on iron objects and surfaces to be protected from any surrounding (damp, industrial, marine, etc.) achieving a longer life and making better use of the finish paint.
Technical characteristics
Size 270/200ml and 520/400ml
Spreading 200ml = 0,7 m2. 400ml = 1,4 m2
Dry to the touch in 1 hour.
Repainted after 72 hours.
How to apply the Universal primer
The surface to be painted must be clean, dry and free of any contaminants. Clean the rust and the scales, if any, with a wire brush. Remove grease stains with solvent.
Shake the can vigorously during 1 minute after the mixing balls sound. Spray from a distance of 25/30 cm, applying thin and quick layers, first horizontally and then vertically. It is advisable to spray two thin layers instead of one thick layer in order to obtain uniform coverage and avoid paint sags.
Once the operation is completed reverse the can and push the nozzle until only gas comes out in order to prevent nozzle clogging.
Do not use on devices connected to the power grid and apply in ventilated areas.
Recommendations for the use of Pintyplus Universal primer
For a colored finish, repaint with Pintyplus Basic or Pintyplus Evolution.
On painted surfaces, if properly adhered proceed with a light sanding to facilitate adherence, and if poorly adhered, remove it.
To facilitate the cleaning of the surface of paint residues, we recommend using the Tech Paint Stripper.
Test prior to use on a sample or fragment of the field to be used to prevent incompatibilities.
Start and finish spraying outside the limits of the work.
Do not use on devices connected to the electrical network and apply in ventilated areas.
Once empty, the spray must be deposited in the yellow container.
International Gelshield 200 is a quick drying and easy to apply epoxy primer, that protects GRP against osmosis. You can use it down to just 5°C and as it’s fast drying, you can apply multiple coats in one day.
Features
Provides protection against osmosis in five coats (250 µm).
It’s fast dry times means you can apply multiple coats in one day
Very easy to apply and can be used down to 5°C
Touch dry in 2 hours at 15 degrees celsius.
Overcoat in 5 hours at 15 degrees celsius.
Where to use
Hulls: Above or below waterline
Compatibility/Substrates : GRP Gelcoats & cured laminate . It should not be used over any one pack products.
Preparation
BARE GRP: Wash down with Super Cleaner, rinse with fresh water and allow to dry. Sand with 180 grade (grit) paper.
PREVIOUSLY ANTIFOULED SURFACE: Remove using Interstrip. Wash down with Super Cleaner, rinse with fresh water and allow to dry. Sand with 180 grade (grit) paper.
EXPOSED LAMINATE : Use Gelshield Plus - Gelshield Plus is a high build epoxy primer best suited for bare laminate
Application
Method: Brush or Roller
Number of coats : Minimum 5
Coverage : 8.1 m²/L
Thinners & Cleaners
International Thinners No 7
Hazard Warnings
Hazard Pictogram :
Signal Word:
Danger
Hazard Statements:
Flammable liquid and vapourCauses serious eye damageCauses skin irritationMay cause an allergic skin reactionMay cause respiratory irritationHarmful to aquatic life with long lasting effects
Precautionary Statement:
General:
Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand.
Prevention:
Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well-ventilated area. Avoid release to the environment.
Response:
IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN (or hair): Take off immediately