Elevate your exterior woodwork with Sikkens Cetol Filter 7 Plus in a beautiful Light Oak shade. This advanced solvent-borne wood stain is designed for exceptional durability and provides a sophisticated satin finish that enhances the natural beauty of woodgrain. Its medium build formula offers robust protection against the elements, specifically designed to shield your joinery from the damaging effects of sunlight thanks to its excellent resistance to UV radiation. This microporous and water-repellent stain ensures that your wood is protected from moisture while still allowing it to breathe, preventing potential damage. A key benefit of Cetol Filter 7 Plus is its impressive 5 year maintenance cycle, offering long-lasting protection and reducing the frequency of reapplication. It is suitable for a wide range of exterior surfaces including lattices doors window frames fences sidings garden sheds pergolas shutters carports sheds door frames windows and rails. For optimal results Cetol Filter 7 Plus is often used as a topcoat following the application of Sikkens Cetol HLS Plus base stain on smooth planed exterior joinery. Stir the product thoroughly before and during use to ensure consistent sheen and color. Cetol Filter 7 Plus is ready to use and should not be thinned. Application is best achieved with a good quality long-haired soft bristle brush using a full flowing coat laid off in the direction of the grain. Apply to a minimum wet film thickness of 55 micrometres. Avoid overbrushing. Do not apply if there is a risk of rain or if air or substrate temperatures are below 5 degrees Celsius or above 30 degrees Celsius. Protect from frost and rain until dry. Two coats of Cetol Filter 7 Plus are recommended with a minimum of 16 hours drying time between coats. For new work consider applying the first coat all around prior to fixing, paying close attention to exposed end grain top and bottom edges of doors and undersides of cills. The second coat should be applied to all exposed surfaces once the first coat is dry but no sooner than 16 hours later. Available in a 1Le container, this Light Oak shade provides an elegant and protective finish for your cherished exterior woodwork. Customers have praised the prompt delivery and meticulous packaging of Sikkens products, ensuring they arrive in excellent condition and ready for application.
A medium build transparent satin topcoat with added UV filters; designed as the final two finishing coats over Sikkens Cetol HLSe. It remains flexible as timber moves and provides extra protection for timber exposed to maximum weathering
 
Number of Coats:
2 over 1 coat of Sikkens Cetol HLSe
Colour:
Pine
Drying Time:
16 hours
Sikkens HLS Woodstain is a low build, solvent-borne, semi-transparent woodstain for use on exterior softwood and hardwood substrates such as cladding, fascias, soffits, rough sawn timber, fencing, or components subject to high levels of wear and abrasion, such as garden furniture, handrails and exterior decking. Cetol HLS plus is applied as a base stain prior to the application of higher build finishes such as Cetol Filter 7 plus. Cetol HLS plus should not be used alone as a finish for hardwood timbers other than decking. *Please note that colour chart displayed is only an approximation of colour. Woodstains will appear differently on different types of timbers and we do not recommend basing colour choice solely on a computer screen image. Key Benefits Highly translucent to bring out the beauty of woodgrain Protects against mould and algae Resistance to UV radiation, peeling and cracking Microporous and water-repellent Special Features UV Resistant Technical Information Touch dry: 4-6 hours Recoatable: 18-24 hours Coverage: 7-14 m²/L