Brushed Brass Boiling Tap – 3 in 1 with 2.4 Litre Tank and Carbon Filter
A boiling tap is already the tallest thing on most worktops, and in brushed brass it stops pretending otherwise. At 358 mm to the top of the squared spout, this is the piece the eye goes to when someone walks into the kitchen — which is either exactly what you want or a good reason to choose the chrome instead.
Behind the finish it is the same three-part system as the rest of the range. The left lever draws filtered water at up to 98°C; the right is an ordinary hot-and-cold mixer. A 2.4 litre tank in the cupboard holds the water at temperature and a carbon filter sits in line before it, so the kettle and the filter jug both leave the worktop.
Brass asks to be answered by something else in the room. A brass or gold-toned sink, cabinet handles, a pendant light, warm wood — any one of them and this brushed brass kitchen tap reads as part of a scheme. In an otherwise all-stainless kitchen it reads as the one thing that does not match, and that is worth being honest about before it arrives.
Three checks before ordering, the same for every tap in this range. The tank is 330 mm tall and needs a 13A socket in the sink cupboard, the filter needs a little over 300 mm of wall beside it, and the tap wants 1 bar minimum — a gravity-fed cylinder in the hot press will not drive it.
Features & Benefits
Brushed brass finish — warm and matt rather than polished, so it does not mirror the room the way chrome does.
3 in 1 operation — filtered boiling on the left lever, standard hot and cold on the right, through a single tap hole.
Adjustable 75–98°C from the touch-screen control on the tank, covering green tea through to blanching.
2.4 litre capacity — roughly ten mugs in succession before the tank reheats.
Carbon filter supplied, rated 3.5 l/min, cutting chlorine taste and slowing scale build-up.
Boiling lever kept separate from the everyday mixer, so it is not turned on by reaching across.
1.5 kW ele