Juno Anti-Slip Microbeads 150g is an anti-slip additive stirred into a floor coating before it is laid: polypropylene microspheres with an average diameter of 180 microns, supplied dry, that go down distributed through the mixed paint. There is nothing to apply on its own.
How much goes in
Dose: one tub per 4 litres of paint, or four tubs per 15 litres. Count tubs against the paint you are mixing, not against the floor area.
In the tub: 150g of dry white beads, density 0.9 ± 0.05 g/cc.
Where it works: interior and exterior floors.
Mixing: shake and mix to a homogeneous mixture before applying.
Applying: brush, roller or spray, and spray work needs a large tip size.
The class 3 rating only holds in named products
Juno certifies class 3 slip resistance to UNE-ENV 12633 Annex A by pendulum test, PTV above 45, in Junoretano 2/C, Poxemyc 2/C, Junosol, Dynapok Suelos 2/C, Pavimyc 2/C and Junopoxi 2/C. Mixed into anything else the beads still texture the surface, but with no certified rating behind it.
Application limits come from the base coating
The beads carry no temperature, humidity or recoat data of their own. Juno's sheet says to consult the application procedures of the paint product being applied, so the minimum temperature, the humidity ceiling and the recoat windows come from that product's sheet.
Conditions and preparation before you coat
Substrate moisture: concrete moisture must not exceed 4%, measured at a depth of 2 cm, and the surface has to be completely dry.
New concrete: let the slab set fully, a minimum of one month, before coating.
Substrate strength: firm and free from dust, laitance, grease and poorly adhered particles, minimum tensile strength 15 kg/m².
Mechanical preparation: laitance and curing agents off by sanding or grinding, then vacuum the dust. The concrete must be textured and free of grease, rubber, curing agents and lime milk; lift grease and rubber stains with solvent or detergent first.
What it will not do
It adds no