Work Safety Tethers near Dublin 22 & Discover Local Offers in Ireland

Petzl GRILLON MGO   Adjustable work positioning lanyard with MGO connector   The GRILLON MGO lanyard is used to make work positioning systems, to complement a fall-arrest system. Its length can be very easily and precisely adjusted as necessary for comfortable positioning at the work station. Connector with very large gate opening is ideal for connection to metal structures or to large-diameter cables and bars. GRILLON MGO is available in two lengths: 2 and 3 m, and is certified to North American and European standards.   User Manual | Care and Handling Tips Download the PDF : technical-notice-GRILLON-3 - 6.38 MB Download the PDF : technical-notice-MGO 60S version internationale-1 - 1.60 MB Download the PDF : technical-notice-MGO-60-INT-1 - 2.00 MB Description Easy to use: the fine adjustment system allows length to be precisely adjusted for comfortable positioning at a work station Used in single mode on the harness ventral attachment point when the anchor is located above the user, so that the load is comfortably distributed between the belt and leg loops. Length is adjusted by operating the handle, while holding the free end of the lanyard Ends equipped with a plastic sheath that holds the connector in place and protect the rope from abrasion Comes with an MGO connector with very large gate opening for connection to metal structures Available in two lengths: 2 and 3 m. Lanyard length is immediately identified by a color-coded label at the connector end Replacement ropes available Specifications Material(s): nylon, polyester, aluminum Certification(s): ANSI Z359.3, CSA Z259.11, CE EN 358, CE EN 12841 type C, EAC, GB 24543/WQX References References L052DA00 L052DA01 Length 2 m 3 m Color(s) white/yellow white/yellow Weight 1220 g 1300 g Guarantee 3 years 3 years Inner Pack Count 1 1    

Petzl MICROFLIP Lanyard   Reinforced adjustable positioning lanyard for tree care work   MICROFLIP is a reinforced adjustable lanyard designed for positioning in tree care work. Its cable core reduces the risk of severing the lanyard and facilitates moving about on the trunk. Yellow color for excellent visibility.    User Manual | Care and Handling Tips Description Designed to be used in double mode on the harness side attachment points Reinforced lanyard with cable core to reduce the risk of severing the lanyard Simple and efficient to use: ergonomic MICROGRAB cam-loaded rope clamp for rapid length adjustment reinforced lanyard that is supple enough to reduce bulk in storage and when carried on the harness, while providing good handling and enough rigidity to facilitate moving about on the trunk reinforced lanyard in yellow color for excellent visibility ends equipped with a plastic sheath to hold the carabiners in correct position Optimal longevity: the sheath of the reinforced lanyard is bonded to the cable for better hold and longer product life ends protected from abrasion by the plastic sheaths may be used with the MICRO SWIVEL to avoid twisting reinforced rope available as a replacement part Available in three lengths: 2.5, 4 and 5.5 m Specifications Material(s): steel, aluminum, plastic, polyester Certification(s): CE EN 358, UKCA, EAC References References L33 025 L33 040 L33 055 Length 2,5 m 4 m 5,5 m Weight 750 g 1055 g 1355 g Guarantee 3 years 3 years 3 years Inner Pack Count 1 1 1