Most suitable for the larger home or business.
High build quality best in class
Humidity control
Complete with Optima 251 control
Supplied with F7 and G4 filters
450 m3 at 100pa
Typically 350m3 @ 250pa
Available in horizontal or Vertical
Up to 96% heat recovery
NZEB energy class
ECO 400 XL is a heat recovery ventilation system that recovers up to 96% of the heat in your home. Compared to using natural ventilation (extraction or ventilation without the use of electricity), the ECO 400 XL system offers the potential for substantial savings. These savings are primarily from keeping the heat inside the walls of the home and not releasing the heat as would otherwise occur using natural ventilation.
The ECO 400 XL is fitted with fully automatic bypass. This means that during the summer, you will be able to cool your home passively (without using electricity) by letting cooler outdoor air directly into your home.
Use of the ECO 400 XL ventilation system
ECO 400 XL is suitable for installation in larger homes or smaller businesses and is characterised by its high energy efficiency and ease of use. An ECO 400 XL ventilation system is well-suited for installation in unused and unheated spaces, such as attics or lofts, from which the ducts can be drawn to the various rooms in your home or business.
The difference between ECO 400 and 400 XL
ECO 400 XL is a further development of our popular ECO 400 ventilation system. This means it is based on proven technology, but with several improvements and new features, such as:
Air output on the ECO 400 XL is approximately 40% higher than the ECO 400, but the system has the same high energy efficiency
ECO 400 XL has a pre-installed Internet gateway as standard so the unit can be monitored remotely and controlled by an app
ECO 400 XL is fitted with our newest Optima 270 control platform
Information PDF's on this machine
Genvex data sheet for ECO 400
Installation manual for ECO 400
User manual using Optima 251 controller
Genvex dat
The device is suitable for replacement of the existing grill in the wall . Automatic operation. Low noise for the EC fan. This unit can be used to cool the room and filters the incoming air.
Unit supplied with remote control and wall mounting bracket Minimal noise emissions – high-tech fan.
Boost function is available on the remote control for a timed higher extraction before reverting back to normal heat recovery mode.
Capacity up to 30m3/hr at maximum 6 watt. If higher volume is required use the 60m3/hr 160mm advanced model.
Internal humidity sensor to automatically increase speed to bring humidity back to normal.
Light sensor to reduce operation at night just to a low volume.
Can be connected to RS485 cable to the home automation system for full control.
Can be used in a Bathroom to replace the fan ventilator. This unit is 93% efficient.
Brochure