SLIGHTLY TINTED TO PERFECTION
Protects and colours with wood grain visible
Harmonious appearance
Resistant to common liquid spillages such as water, juice, tea, cola and wine
Saliva-resistant and sweatproof, suitable for children’s toys
Microporous, breathable finish which does not crack, peel or flake
No sanding necessary for spot repairs or future applications
FINISHES: White, Light Grey, Honey, Amber, Terra, Graphite, Black (all Satin)APPLICATION TOOL: Osmo Flat Brush, Floor Brush, Hand Pad or Osmo Microfibre RollerRECOMMENDED USE: Interior wooden floors and furnitureRECOAT: One coat, when signs of wear become visibleSIZES: 750ml, 2.5LDRY TIME: 24 hoursCLEAN UP: Osmo Brush CleanerCOVERAGE: 30m²/L with one coatCOATS: Floors: max. one coat, then a top coat of clear Osmo Polyx®-Oil (3040 White: use 3040 White as the top coat, to prevent yellowing). Furniture: max. two coatsCARE: Osmo Wash and Care or Spray-Mop
SURFACE PREPARATIONWood surface must be clean, dry and frost-free (moisture content max. 18%).Osmo Polyx®-Oil Tints is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use.Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works.Fill small cracks, larger joints or holes in wood (Osmo Wood Filler).Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P180-240. Before oiling the surface, remove sanding dust with a soft brush or vacuum cleaner.The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
METHOD OF APPLICATIONTransparent colour: With Osmo Flat Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Floor Brush, apply thinly and evenly to the clean and dry wood along the wood grain and spread well.Allow to dry for approx.