Multimeter Accessories near Meath : getlocal.ie

Multimeter Accessories 98 Offer(s)

More Tool Accessories searches
Only
Delivers To Meath

Starrett 440 Depth Micrometers have a 63.5mm (2.1/2") base and 3.2mm (1/8") diameter measuring rods. Reading surfaces have a satin chrome finish that resists rust. Ring-type lock nut f...

Starrett Mechanical Depth Micrometer Graduation: .01mm Range: 0-150mm Base Length: 63.5mm Code 440MZ-150RL

€231.00

Inspection Equipment Co Ltd

Visit Provider

Starrett 440 Depth Micrometers have a 63.5mm (2.1/2") base and 3.2mm (1/8") diameter measuring rods. Reading surfaces have a satin chrome finish that resists rust. Ring-type lock nut f...

Ireland's LocalComparison Directory

Your Gateway To 1,989,519 Offers From Businesses Around Ireland

Multimeter Accessories near Meath & Discover Local Offers in Ireland

Multimeter Accessories 98 Offer(s)

Starrett Mechanical Depth Micrometer Graduation: .01mm Range: 0-150mm Base Length: 63.5mm Code 440MZ-150RL

Starrett Mechanical Depth Micrometer Graduation: .01mm Range: 0-75mm Base Length: 63.5mm Code 440MZ-75RL

Micrometer Head, Differential Screw 0-0,5", 0,001/0,00002", Sperical 110-504-10

Micrometer Head, Differential Screw 0-1mm, 0,001mm, Spherical110-107-10

Micromar Bore Micrometer Set 6-12mm 4190350

Tubular Inside Micrometer 725-750mm 133-170

Tubular Inside Micrometer, Hardened Face 2-12" 137-212

Micrometer Stand, 45° Angle Type for Micrometer 0-50mm/0-2" 156-105-10

Mitutoyo Digital 3-Point Internal Micrometer Set 0,275-0,5", Interchange. Head IP65, 468-976

Tubular Inside Micrometer 775-800mm 133-172

Tubular Inside Micrometer 900-925mm 133-177

Tubular Inside Micrometer 875-900mm 133-176

Mitutoyo Inside Micrometer, Interchangeable Rods 2-8", with 3 Rods, Hardened Face 141-208

Micrometer Head, Carbide Tipped Spindle Standard Type, 0-0,5", 0,001", Flat 149-148-10

Micrometer Head, Small Standard Type 0-13mm, 0,01mm, Flat, Rev. Reading 148-821-10

Micrometer Head, Small Standard Type 0-0,5", 0,001", Spherical 148-811-10

Micrometer Head, Carbide Tipped Spindle Standard Type, 0-0,5", 0,001", Flat, with Clamp Nut/Spindle Lock 149-182-10

Micrometer Head, Medium-sized Standard 0-25mm, Reverse Reading 150-821

Micrometer Head for Thorlabs 0-1", 0,001", Spherical, w/o Ratched 150-811THL1

Micrometer Head, Medium-sized Standard 0-25mm, Clamp Nut, Spherical Spindle 150-802

Mitutoyo 3-Point Internal Micrometer Holtest 20-25mm 368-766

Mitutoyo Depth Micrometer, Interchangeable Rods 0-300mm, 63mm Base 129-152

Micrometer Head, Differential Screw 0-0,05" 110-112

Mitutoyo Digital Gear Tooth Micrometer IP65 0-25mm 324-251-30

Screw Thread Micrometer Interchangeable Tips, 175-200mm 126-132

Mitutoyo Digital Gear Tooth Micrometer IP65 Inch/Metric, 0-1" 324-351-30

Mitutoyo Gear Tooth Micrometer 250-275mm 124-183

Mitutoyo Digit Outside Micrometer 2-3" 193-213

Mitutoyo 516-334-22 Micrometer Check Set Description : Mitutoyo 9 Piece Micrometer Check set, Imperial. Set Consists off: .0625, .100, .125, .200, .250, .300, .500, 1, 2” • Optical parallel (t = .5")

Screw Thread Micrometer 0-25mm, 2-3mm/13-9 TPI 125-104

Mitutoyo 3-Point Internal Micrometer Holtest Set 12-20mm (2 pcs.) 368-991

Micrometer Ratchet Stop Plastic for Analog Micrometer 0-300 mm, Green, Item number: 985076

Mitutoyo 3-Point Internal Micrometer Holtest 20-25mm 368-766

Micrometer Head, Medium-sized Standard 0-1", Clamp Nut 150-207

Inspec 315-05-070 3 Point micrometers Accuracy:.004mm Graduation:.005mm Range: 16-20mm

Mitutoyo 3-Point Internal Micrometer Holtest Set 6-12mm 368-911

Micrometer Setting Standard Length: 1375mm 167-379

Micrometer Setting Standard Length: 41" 167-405

Micrometer Setting Standard Length: 1000m 167-140

Micrometer Setting Standard Length: 38" 167-178

Micrometer Setting Standard Length: 1025mm 167-365

Micrometer Setting Standard Length: 40" 167-180

Micrometer Head Non-rotating Spindle 0-25mm, 0,01mm 153-203

Inspec Screw Thread micrometer Measuring Tips F0201 for 60-48 TPI

Sheet Metal Micrometer Graduated Dial 0-25mm, 50mm Throat 119-202

Micrometer Head Non-rotating Spindle 0-15mm 153-101

Micrometer Head, Spindle Feed 0,1mm/rev. 0-6,5mm, 0,002mm, Spherical, with Clamp Nut 148-343-10

Micrometer Setting Standard Length: 12" 167-152

Micrometer Setting Standard Length: 375mm 167-115

Micrometer Setting Standard Length: 15" 167-155

Micrometer Setting Standard Length: 18" 167-158

Micrometer Head, Spindle Feed 0,1mm/rev. 0-6,5mm, 0,002mm, Spherical 148-342-10

Micrometer Head Non-rotating Spindle 0-0,5" 153-108

Micrometer Head, Medium-sized Type with D=8mm Spindle, 0-1", 0,001", Flat, with Spindle Lock, w/o Ratched 151-241-10

Micrometer Head, Medium-sized Type with D=8mm Spindle, 0-25mm, 0,01mm, Flat, with Clamp Nut/Spindle Lock, w/o Ratched 151-226-10

Micrometer Setting Standard Length: 1250mm 167-374

Micrometer Head, Ultra Small Type 0-6.5mm, 0.01mm, Spherical, with Clamp Nut 148-207-10

Micrometer Head, Carbide Tipped Spindle Standard Type, 0-0,5", 0,001", Flat, Rev. Reading 149-831-10

Micrometer Head, Carbide Tipped Spindle Standard Type, 0-15mm, 0,01mm, Spherical 149-801-10

Micrometer Head, Differential Screw 0-2,5mm 110-102

Related Searches

Let's Support Local & Get Ireland Selling Online. We are offering registered Irish businesses and affordable way to start selling online - Find Out How

About

Services

Links

Discover More

To search by distance please choose your location

Ireland's Local
Comparison Directory