Our prices shown include V.A.T. and installation in standard vehicles.
Our commercial vehicle sound system upgrade consists of:
Component speaker upgrade.
Sound deadening.
A high powered amplifier.
An optional active subwoofer.
Component Speakers
The first step to upgrade an audio system is to fit a set of front component speakers. This consists of a woofer, tweeter and a separate crossover. The crossover separates the frequencies produced by sound into high frequency and middle frequency. The tweeter produces the higher frequencies and it is best suited either high up on the door or around the dash area. The woofer should be placed lower down in the door area. These are generally fitted in factory locations so nothing is on show.
We offer the Hertz DSK165.3 two way component speakers:
Specifications:
Power Handling - Peak W 160
Power Handling - Continuous W 80
Impedance Ω 4
Frequency response Hz 50 ÷ 23k
Sensitivity dB SPL 93
Woofer cone Water-repellent pressed paper
Tweeter dome PEI
Crossover type Hi Pass
Crossover cut off 3,5 kHz @ 12 dB Oct.
Amplifier:
To get the best from your component speakers we install a high power amplifier/ This will increase power and also allow you to tune your speakers to your own specification. An amplifier will also add depth to the sound and give you more control over what you are listening to. The amplifier can be quite small and sometimes hidden away so you can’t see it at all.
We offer the Vibe POWERBOX65.4M-V7: Powerbox 520 Watt Micro 4 Channel Amplifier.
Specifications
4 x 65w @ 4 ohm
520w Peak 1.5″ x 7.4″ x 3.2″ (37mm x 187mm x 82mm
Frequency response: 50Hz – 20kHz
Crossover type: HP/Full
Crossover range: 50Hz Class D micro amplifier
Active Subwoofer (optional)
Pioneer TS-WX130DA is a small active subwoofer in a sealed enclosure, delivering 160 W Maximum power and 50 W nominal power. It has two selectable Bass Modes: Deep and Dynamic, producing 160 Watts of strong, rich, deep bass that you can feel. Users c
All of our prices shown include installation in a standard vehicle. For example a vehicle that does not have a separate factory amplifier.
Please contact us on 014971273 or email sales@icesystems.ie to get an exact quote for your vehicle.
When it comes to classic cars you can have a great sound without needing to compromise the look of your classic car. Choose from any of our radio head units in the classic car section, combine it with our sound system upgrade and have a high quality modern sound with real depth while retaining your cars period look.
We will fit your choice of classic car radio from our range. Combine it with the best possible speakers that can be fitted in the vehicles existing speaker locations, in conjunction with the compact yet powerful Pioneer TS-WX130EA under seat subwoofer.
Period correct style radio head unit.
Replacement speakers.
Pioneer TS-WX130EA subwoofer.
Sound deadening where applicable.
With our range of classic car radios we fit a unit that does not look out of place in you 1970s, 80s or 90s car. These units look period correct but offer a wide range of modern features including bluetooth handsfree and music streaming.
When it comes to classic cars you can be limited by speaker diameter and depth, not to mention the style of the speaker itself, however we have sourced speakers which make the best of the space available. Where possible we retain your original speaker grills and fit a black speaker that does not stand out. Where it is not possible to retain the original grills we have a range of simple black non branded grills available.
As you are generally limited on speaker size in older cars the best way to get a good sound in a classic car is to reduce the bass load on the smaller speakers by adding a subwoofer. By fitting the compact Pioneer TS-WX130EA we can allow it to produce the lower frequencies while allowing the speakers to produce the higher frequencies. The result is a much fuller sound than you would expect. T