The Victron MultiPlus-II 12/3000/120-50 2x120V is a 3kVA inverter/charger for 12V battery systems, built for North American 120/240V split-phase installations such as US-spec RVs, motorhomes and boats. It accepts and passes through both lines of a 50A 120/240V shore or generator supply. This is the non-UL version; choose the UL 458 model where certification is required.
Key features
Split-phase input: uses the full 50A of a 120/240V supply for charging and loads; on a single 120V supply it feeds both sides of the distribution panel.
Battery-friendly inverting: in inverter mode it supplies 120V to both lines, so heavy 240V loads can't drain the battery.
Uninterrupted power (UPS): switches to inverter within milliseconds if shore or generator power drops out.
PowerControl and PowerAssist: limits draw on a weak supply and boosts it with battery power during peak demand.
120A adaptive charger: suits lithium, AGM and gel batteries.
Scalable and connected: parallel and three-phase capable; add a GX device for VRM remote monitoring.
Specifications
Part number
PMP122305100
Nominal battery voltage
12V
AC output
2 x 120VAC (120/240V split phase when supplied), 60Hz
Rated power
3,000VA
Max. battery charge current
120A
Transfer switch
50A
Communication
VE.Bus (2 x RJ45)
Dimensions (H x W x D)
578 x 277 x 148 mm
Weight
22 kg
Note: this is a North American 120V model. For Irish and European 230V systems, see the standard MultiPlus-II range. Euromotive Energy can advise on the right unit for your installation.
The Victron MultiPlus-II 12/3000/120-50 2x120V (UL 458) is a 3kVA inverter/charger for 12V battery systems, built for North American 120/240V split-phase installations – for example US-spec RVs, motorhomes and boats. It accepts and passes through both lines of a 50A 120/240V shore or generator supply, and carries UL 458 certification for mobile use.
Key features
Split-phase input: uses the full 50A of a 120/240V supply for charging and loads; on a single 120V supply it feeds both sides of the distribution panel.
Battery-friendly inverting: in inverter mode it supplies 120V to both lines, so heavy 240V loads such as water heaters or air conditioning can't drain the battery.
Uninterrupted power (UPS): switches to inverter within milliseconds if shore or generator power drops out.
PowerControl and PowerAssist: limits draw on a weak supply and boosts it with battery power during peak demand.
120A adaptive charger: suits lithium, AGM and gel batteries.
Scalable and connected: parallel and three-phase capable; add a GX device for VRM remote monitoring.
Specifications
Part number
PMP122305102
Nominal battery voltage
12V
AC output
2 x 120VAC (120/240V split phase when supplied), 60Hz
Rated power
3,000VA
Max. battery charge current
120A
Transfer switch
50A
Certification
UL 458
Communication
VE.Bus (2 x RJ45)
Dimensions (H x W x D)
578 x 277 x 148 mm
Weight
22 kg
Note: this is a North American 120V model. For Irish and European 230V systems, see the standard MultiPlus-II range. Euromotive Energy can advise on the right unit for your installation.