BAL External Level Out Fast Setting Levelling Compound - 25kg
BAL’s external tile installation range has been carefully formulated to provide ease of use when installing external pavers, 20mm external porcelain tiles or stone.
BAL Level Out is a high performance, fast-setting external leveller for smoothing rough or impact damaged external concrete bases prior to tiling.
It can be used from 2mm to 20mm thickness in a single application and is suitable for tiling after 3 hours, walkable after 2 hours at 20°C. Water content can be reduced if gradient levelling has to be carried out.
Where levelling is needed on external concrete bases simply add 5.25 litres of water and then pour. BAL Level Out provides installers with a 30 minute pot life for a longer time to pour and spread. Water and frost resistant ensures long-life installations.
BAL External Level Out is Used For:
Smoothing rough or impact damaged concrete
Laying onto concrete substrates that are uneven
Bed depth from 2mm up to 20mm thickness
Dry/wet external environments including total immersion in pools
Domestic or commercial use
Level Out features
Smoothing rough or impact damaged concrete
Suitable for external applications
Fast setting – walkable after 2-3 hours
Apply from 2mm to 20mm thick in a single application
Note: the thickness of combined layers should not exceed 20mm.
Grey colour
Pot life at 20°C: 30 minutes
Lay tiles/pavers after: 3 hours (at 20°C)
Frost resistant
Bag weight: 25kgs
Conforms to ISO 9001 requirements
25 year manufacturer's guarantee
Restrictions: NOT suitable for
Use as a wearing screed
For levelling sloped backgrounds where falls have been intentionally designed to divert water to a primary drainage point. Any substrate that has been laid to falls should always maintain a safe slope for maximum effective drainage.
Coverage
3.2 kg/m2 @2mm thickness
BAL External Bedding Mortar - 25kg
BAL’s external tile installation range has been carefully formulated to provide ease of use when installing external pavers, 20mm external porcelain tiles or stone.
BAL External Bedding Mortar is a special cement with graded fillers for producing a mortar bed for external use, which allows external pavers and tiles to be fixed onto.
Designed for use in external dry or wet installations, BAL External Bedding Mortar is suitable for a bed depth from 10mm (Min 25mm on MOT Type 1) up to 100mm thickness.
Pair with BAL Priming Slurry Bond before placing paving or outdoor tiles.
BAL External Bedding Mortar is Used For:
Laying a mortar bed before fixing external pavers and tiles
Dry / wet / exterior
Domestic or commercial use
External floors
Bedding Mortar features
Can be laid from 10mm thickness to 100mm
Just mix with water
Under 1 hour working time at 20°C
Walkable in 12 hours
Freeze / thaw resistant
External use only
Grey colour
Pot life at 20°C: 60 minutes (bed thickness 10mm to 100mm)
Pave after: Paving should begin immediately
Grout after: 6 - 8 hours (at 20°C)
Bag weight: 25kgs
Conforms to BS-7533 requirements
25 year manufacturer's guarantee
Restrictions: NOT suitable for
Internal use
Use in total immersion
Conventional tiling
Walls or any vertical planes