Cone 6 oxidation: Micro Cerulean is a glossy, translucent, medium blue glaze with an aqua float that breaks over texture. Blooms of shimmering blue micro-crystallization will develop during the firing process.
Cone 10 reduction (image above): Glaze turns to a variegated grey/blue.
TIP: This glaze is stable at 3 coats. Additional coats or increased application thickness may result in movement. Due to the translucent nature of this product, be aware of your application consistency and thickness to avoid streaky brushstrokes. We recommend firing our micro glazes to cone 6 oxidation to reach crystalline development. Micro Cerulean achieves a stable, semi-opaque, deep blue result that breaks over texture and has a pearlescent satin finish when fired to cone 5. Can be used in oxidation or reduction firings. Results may vary. The choice of clay body, thickness of application, firing process, and temperature will greatly affect the fired results. Always test your application on your clay body in your kiln environment.
Cone 6 oxidation: Speckled Buff Engobe fires matte ivory with brown speckles. Engobes are used to coat your clay body to your preferred finish/colour and are a great base to achieve variability in your glaze results.
Cone 10 reduction (image above): No change.
Tips: Can be applied to wet clay, greenware or soft fired, cone 04 bisque. Engobes are often used for a variety of decorative techniques, such as sgraffito and majolica. Fires matte. Apply clear glaze to intensify colour or for use on dinnerware. Engobes will impact glaze results when used as a base. Engobes are used to change the colour of your clay colour surface without cross contamination and easy clean up in your studio. Can be used in oxidation or reduction firings. Results may vary. The choice of clay body, thickness of application, firing process, and temperature will greatly affect the fired results. Always test your application on your clay body in your kiln environment.